Best Reviews of Progressive Suspension Slammer Suspension Drop Kit 10.5" Shocks Black B28-1201

Buy Progressive Suspension Slammer Suspension Drop Kit 10.5" Shocks Black B28-1201

Progressive Suspension Slammer Suspension Drop Kit 10.5" Shocks Black B28-1201 Product Description:



  • Shocks for Slammer Suspension drop kit

Product Description

Shocks for Slammer Suspension drop kitThis item fits the following models: 1996-2003 Harley Davidson XL1200C Sportster 1200 Custom1996-2003 Harley Davidson XL1200S Sportster 1200 Sport1999-2003 Harley Davidson XL883C Sportster 883 Custom2002-2003 Harley Davidson XL883R Sportster 883 Roadster1988-2003 Harley Davidson XLH12001988-2003 Harley Davidson XLH8831988-1995 Harley Davidson XLH883DLX Sportster 883 Deluxe1988-2003 Harley Davidson XLH883HUG Sportster 883 Hugger

Customer Reviews

Most helpful customer reviews

2 of 2 people found the following review helpful.
5perfect fit!
By purplehaze08
these shocks fit my 2008 HD 1200c perfectly!! i am short and my confidence was low as well b/c i didn't feel as though i had control of the bike when i sat on it. but now that my feet plant firmly on the ground when i am seated if feel as though i have total control! not only did the slammers lower the bike to the perfect heighth they look great too!

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy Progressive Suspension Slammer Suspension Drop Kit 10.5

Cheap New-Black Scanner Headphone With Passive Noise Cancellation - Y68186

New-Black Scanner Headphone With Passive Noise Cancellation - Y68186Buy New-Black Scanner Headphone With Passive Noise Cancellation - Y68186

New-Black Scanner Headphone With Passive Noise Cancellation - Y68186 Product Description:









Product Description

Closed leatherette ear cushions for maximum isolation Dynamic element for extended frequency response Replaceable Velcro strap headphone Frequency response: 40Hz-20kHz Cord length: 8' - single entry 3.5mm plug with 6.3mm adapter

Customer Reviews

Most helpful customer reviews

0 of 0 people found the following review helpful.
4They feel nice on your head
By Rhonda Sawyer
These are not what is pictured which was a little disappointing. They are solid black and the ear part is a little smaller than shown. They are still a nice headphone. Light weight and comfortable.

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy New-Black Scanner Headphone With Passive Noise Cancellation - Y68186

Sale Arlen Ness Big Sucker Stage I Air Filter Kit Black Backing Plate Red Filter 18-562

Arlen Ness Big Sucker Stage I Air Filter Kit Black Backing Plate Red Filter 18-562Buy Arlen Ness Big Sucker Stage I Air Filter Kit Black Backing Plate Red Filter 18-562

Arlen Ness Big Sucker Stage I Air Filter Kit Black Backing Plate Red Filter 18-562 Product Description:



  • Gain up to 12 percent more Horsepower by simply installing a Big Sucker on your bike!
  • These kits are designed to be used with the stock air filter cover
  • Sportster models require the purchase of a custom outer air cleaner
  • These kits can be used as an exposed filter design when using one of our Stage 1 billet covers
  • All mounting hardware included

Product Description

Features a one-piece aluminum backing plate/carb support bracketEliminates the need for banjo fittings, hoses, and clampsBreather passages exit at the mouth of the carburetor/throttle body, creating a virtually closed-loop systemPre-oiled filter element available in red or stainless jacketed stylesBacking plates available in standard, chrome, or black finishAll necessary hardware and instructions includedThis item fits the following models: 1994-1998 Harley Davidson FLHR Road King1993 Harley Davidson FLHS Electra Glide Sport1995-1998 Harley Davidson FLHT Electra Glide Standard1993-1998 Harley Davidson FLHTC Electra Glide Classic1993-1997 Harley Davidson FLHTCU Electra Glide Ultra Classic1993-1999 Harley Davidson FLSTC Heritage Softail Classic1993-1999 Harley Davidson FLSTF Fat Boy1993 Harley Davidson FLSTN Heritage Softail Nostalgia1994-1996 Harley Davidson FLSTN Heritage Softail Special1997-1999 Harley Davidson FLSTS Heritage Springer1993-1995 Harley Davidson FLTCU Tour Glide Ultra Classic1998 Harley Davidson FLTR Road Glide1995-1998 Harley Davidson FXD Dyna Super Glide1993-1998 Harley Davidson FXDL Dyna Low Rider1994-1998 Harley Davidson FXDS-Conv Dyna Convertible1993-1998 Harley Davidson FXDWG Dyna Wide Glide1993-1994 Harley Davidson FXLR Low Rider Custom1993-1994 Harley Davidson FXR Super Glide II1993 Harley Davidson FXRS-Conv Low Rider Sport Convertible1993 Harley Davidson FXRS-SP Low Rider Sport1999 Harley Davidson FXST Softail Standard1999 Harley Davidson FXSTB Night Train1993-1999 Harley Davidson FXSTC Softail Custom1993-1999 Harley Davidson FXSTS Springer Softail1995-1997 Harley Davidson FXSTSB Bad Boy

Customer Reviews

Most helpful customer reviews

0 of 0 people found the following review helpful.
5Big Sucker is Nice
By Nick King
Upon opening the shipping box I found the Ness Big Sucker to be in an appealing box with plenty of information on it. Upon opening up the box and removing the parts, I found that the parts were carefully packaged and the instructions were very good on how to mount this unit to my carb. It appears to be well made and there are a lot of them out there. I just hope it does what it says.

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy Arlen Ness Big Sucker Stage I Air Filter Kit Black Backing Plate Red Filter 18-562

Compare Prices Motordyne 5/16 Plenum Spacer Basic 350Z G35

Motordyne 5/16 Plenum Spacer Basic 350Z G35Buy Motordyne 5/16 Plenum Spacer Basic 350Z G35

Motordyne 5/16 Plenum Spacer Basic 350Z G35 Product Description:



  • Power gains from adds 11HP-13HP
  • Can retain strut bar and engine cover
  • Hardware included

Product Description

A flat spacer yielding the best overall gains, the Motordyne 5/16" plenum spacer outperforms the competition while keeping your strut bar and engine cover in place.

This stealth modification adds 11HP-13HP and is the simplest to install.

All Motordyne melt proof plenum spacers come with quality parts, pre-attached gaskets and self sealing plenum internal supports for OEM reliability.

Customer Reviews

Most helpful customer reviews

0 of 0 people found the following review helpful.
4Good product
By Rob180sx
Seems to be made with high quality parts. It is a very simple design but well thought out. Instruction are good including the photos. Maybe a few more photos could have helped but other than that I'm very happy.

0 of 0 people found the following review helpful.
5Motordyne spacer
By Patrick M
This is a decent product. It will yield noticeable power gains and give your engine a little bit meaner growl. I'm glad I put it in!

See all 2 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy Motordyne 5/16 Plenum Spacer Basic 350Z G35

Compare Prices Arlen Ness Big Sucker Stage I Air Kit - Black Backing Plate - Red Filter 18-561

Arlen Ness Big Sucker Stage I Air Kit - Black Backing Plate - Red Filter 18-561Buy Arlen Ness Big Sucker Stage I Air Kit - Black Backing Plate - Red Filter 18-561

Arlen Ness Big Sucker Stage I Air Kit - Black Backing Plate - Red Filter 18-561 Product Description:



  • All-in-one backing plate features a built-in carb support and built-in breather tunnels at each head to decrease crankcase pressure.
  • Each tunnel exits at the mount of the carburetor to create a virtually closed loop system
  • Breather features O-ring banjo bolt seals and a radiused intake manifold. No oil hoses, no oil fittings, no leaking and no mess
  • Stage I kit features a Team Ness High-Flow filter that accepts all 93-up oval or round O.E.M. outer covers
  • All kits include a Big Sucker aluminum backing plate, Team Ness High-Flow air filter, chrome banjo bolts for Twin Cam and 93-Up EV2 Big Twin, simple instructions and all necessary hardware

Product Description

All-in-one backing plate features a built-in carb support and built-in breather tunnels at each head to decrease crankcase pressure.
Each tunnel exits at the mount of the carburetor to create a virtually closed loop system
Breather features O-ring banjo bolt seals and a radiused intake manifold. No oil hoses, no oil fittings, no leaking and no mess
Stage I kit features a Team Ness High-Flow filter that accepts all 93-up oval or round O.E.M. outer covers
All kits include a Big Sucker aluminum backing plate, Team Ness High-Flow air filter, chrome banjo bolts for Twin Cam and 93-Up EV2 Big Twin, simple instructions and all necessary hardware

This Item Fits the Following Applications:
2011 Harley Davidson FXS Blackline
2011 Harley Davidson FXDWG Dyna Wide Glide
2011 Harley Davidson FXDF Fat Bob
2011 Harley Davidson FXDC Super Glide Custom
2011 Harley Davidson FXDB Street Bob
2011 Harley Davidson FXCWC Rocker C
2011 Harley Davidson FLSTSB Cross Bones
2011 Harley Davidson FLSTN Softail Deluxe
2011 Harley Davidson FLSTFB Fat Boy Lo
2011 Harley Davidson FLSTF Fat Boy
2011 Harley Davidson FLSTC Heritage Softail Classic
2010 Harley Davidson FXSTC Softail Custom
2010 Harley Davidson FXDWG Dyna Wide Glide
2010 Harley Davidson FXDF Fat Bob
2010 Harley Davidson FXDC Super Glide Custom
2010 Harley Davidson FXDB Street Bob
2010 Harley Davidson FXD Dyna Super Glide
2010 Harley Davidson FXCWC Rocker C
2010 Harley Davidson FLSTSB Cross Bones
2010 Harley Davidson FLSTN Softail Deluxe
2010 Harley Davidson FLSTFB Fat Boy Lo
2010 Harley Davidson FLSTF Fat Boy
2010 Harley Davidson FLSTC Heritage Softail Classic
2009 Harley Davidson FXSTC Softail Custom
2009 Harley Davidson FXSTB Night Train
2009 Harley Davidson FXDL Dyna Low Rider
2009 Harley Davidson FXDF Fat Bob
2009 Harley Davidson FXDC Super Glide Custom
2009 Harley Davidson FXDB Street Bob
20

Customer Reviews

Most helpful customer reviews

1 of 1 people found the following review helpful.
5Love it
By Linda L. Driscoll
put these on all the bikes I've had. Increased air means increased power. Affordable for any bike and no adjustment, at least for me, to computer system.

1 of 1 people found the following review helpful.
5Big Sucker
By chuck
I ordered the Stage one Air Filter and the price for the chrome one was the cheapest I have seen. The unit was delivered quickly and it was complete in a sealed box. It was installed by me and all is great. Thanks

0 of 0 people found the following review helpful.
52009 Dyna BIG Sucker
By BPS
I put this on my 96" Dyna, and it works great. Massive extra power. I added a TFI, adjusted it, and off I went. No issues with soaking rain at all.

See all 3 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy Arlen Ness Big Sucker Stage I Air Kit - Black Backing Plate - Red Filter 18-561

Price Comparisons Youth Motocross ATV Dirt Bike MX Helmet, Gloves and Goggles Blue Flame, X-Large

Youth Motocross ATV Dirt Bike MX Helmet, Gloves and Goggles Blue Flame, X-LargeBuy Youth Motocross ATV Dirt Bike MX Helmet, Gloves and Goggles Blue Flame, X-Large

Youth Motocross ATV Dirt Bike MX Helmet, Gloves and Goggles Blue Flame, X-Large Product Description:



  • Our Newest Ultra High Quality Youth Helmet Set
  • Meets Department of Transportation (DOT) safety standards
  • DOT Rated
  • This is the perfect helmet for those looking for a high quality off-road motocross helmet
  • SIZE CHART BELOW

Product Description

# Our Newest Ultra High Quality Helmet # Meets Department of Transportation (DOT) safety standards which means you are assured safety and compliance with motorcycle helmet laws. # Meets the Federal Motor Vehicle Safety Standard 218 (FMVSS 218) # Our most economical motocross motorcycle helmet is loaded with features including: # 3-Point sun visor for added strength and stylish looks # Liner is easily removable and machine washable. # Fully vented helmet, with multiple vents running along the sides of the helmet. # This is the perfect helmet for those looking for a high quality off-road motocross helmet at an affordable price # Premium chrome mouthpiece #Matching Gloves and Goggles Excellent motorcycle helmet, sport bike helmet, scooter helmet, moped helmet, snowmobile helmet Youth Sizes: Youth Small: 18 ½ to 19 ½ Youth Medium: 19 ½ to 20 ½ Youth Large: 20 ½ to 21 ½ Youth XL: 21 1/2 to 22 1/2

Customer Reviews

Most helpful customer reviews

5 of 5 people found the following review helpful.
5wonderful
By archaeon
i bought this for my sons birthday to go with his new dirt bike. it was exactly as advertised and of good quality for the price.

4 of 4 people found the following review helpful.
5Great protection & value
By ksavage
I bought this helmet for my daughter to use on our four wheelers and her pocket rocket and her drifter go cart. Great protection for the price and she loves it. She also wears contacts and the goggles that came with the helmet help to keep dirt and other debris out of her eyes while riding.

2 of 2 people found the following review helpful.
4Great package for the kids
By Sheller
You can't beat the price and the quality was up to par as well. We had a slight issue with a hemlet screw not quite fitting correctly on the sun visor, but again, that is so minor that it doesn't affect the helmet or safety one bit. Simple change out...easy. My boys loved all the color combinations and everything fit very well. Good stuff!

See all 8 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy Youth Motocross ATV Dirt Bike MX Helmet, Gloves and Goggles Blue Flame, X-Large

Compare Cobra 3" Slip-Ons Black Black 6005B

Buy Cobra 3" Slip-Ons Black Black 6005B

Cobra 3" Slip-Ons Black Black 6005B Product Description:



  • 3 inch muffler bodies for great sound
  • Mufflers can be repacked to tune the sound
  • Radially slashed, chromed billet tips indexed for multiple positioning
  • Includes OEM-style crossover on models that come stock with one for enhanced performance
  • Comes with 2-inch replaceable baffles

Product Description

3" chromed muffler bodies for great soundMufflers can be repacked to tune the soundRadially slashed, chromed billet tips indexed for multiple positioningIncludes OEM-style crossover on models that come stock with one for enhanced performanceComes with 2" bafflesEasy installation using stock mounting bracketsMade in USAFits stock head pipesThis item fits the following models: 1995-2005 Harley Davidson FXD Dyna Super Glide2007-2010 Harley Davidson FXD Dyna Super Glide2007-2012 Harley Davidson FXDB Street Bob1992 Harley Davidson FXDB-D Dyna Glide Daytona2006 Harley Davidson FXDBI Street Bob1991 Harley Davidson FXDB-S Dyna Glide Sturgis1992 Harley Davidson FXDC Super Glide Custom2005 Harley Davidson FXDC Super Glide Custom2007-2012 Harley Davidson FXDC Super Glide Custom2005-2006 Harley Davidson FXDCI Super Glide Custom2012 Harley Davidson FXDF Fat Bob2004-2006 Harley Davidson FXDI Dyna Super Glide2006 Harley Davidson FXDI35 Dyna 35th Anniversary Super Glide1993-2005 Harley Davidson FXDL Dyna Low Rider2007-2009 Harley Davidson FXDL Dyna Low Rider2004-2006 Harley Davidson FXDLI Dyna Low Rider1994-2000 Harley Davidson FXDS-Conv Dyna Convertible2012 Harley Davidson FXDWG Dyna Wide Glide1999-2005 Harley Davidson FXDX Dyna Super Glide Sport2004-2005 Harley Davidson FXDXI Dyna Super Glide Sport2001-2003 Harley Davidson FXDXT Dyna Super Glide T-Sport

Customer Reviews

Most helpful customer reviews

0 of 0 people found the following review helpful.
5great look,sound
By S. Eggie
Wow! So the stock mufflers on my 2000 dyna super glide sport, sucked. my old suzuki was louder! So I looked into replacing the entire exhaust, but that requires a bigger intake/filter system, re-jetting the carb and an extra $600. It was between the cobras and rush. I chose the cobras because the price was right, and I liked the chrome tips. After all, if your dropping $300+ on mufflers you want a bit of custom look. the sound is amazing. awesome deep rumble on acceleration and cool growl when engine braking. at speed they smooth out beautifully, and frankly are less obtrusive sounding than the stock when cruising. Maybe it's a bit of a placebo effect( I doubt it though considering how restrictive the stock mufflers are), but the throttle response feels smoother as well. I had them installed in 30 min, all you need is some wd-40, a ratchet and a 10mm,14mm and 1/2" socket.

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy Cobra 3

Affordable Motordyne 5/16 Copper Isothermal Plenum Spacer 350Z G35

Motordyne 5/16 Copper Isothermal Plenum Spacer 350Z G35Buy Motordyne 5/16 Copper Isothermal Plenum Spacer 350Z G35

Motordyne 5/16 Copper Isothermal Plenum Spacer 350Z G35 Product Description:



  • 12HP-14HP est. gain
  • Reduces power robbing heat soak
  • Compatible with engine covers and strut bars
  • Does not freeze over like most units

Product Description

The Motordyne Copper Iso Thermal plenum spacer adds 12HP-14HP and reduces the effect of power robbing heat soak by thermally isolating both the upper and lower plenum. The 5/16" thickness provides the best overall performance and is fully compatible with your engine cover and strut bar.

All Motordyne Iso Thermal systems keep your upper and lower plenum cooled without the risk of throttle body freezing when driving in cold weather.

Use the Copper if it snows in your area.

Customer Reviews

Most helpful customer reviews

0 of 0 people found the following review helpful.
5Love my Spacer
By Trenton Hamson
Great product! Couldn't be more happier. The previous poster is right....instructions not the best....the video helped. Instantly felt the improvement. Great mod!

0 of 0 people found the following review helpful.
5Love it
By Almaz
Easy to install. Great product! I think Plenum Spacer is one of the best upgrades you can get before going FI.

0 of 0 people found the following review helpful.
4Great mod, hell of an install..
By Vance
I have a 03' 350z with intake, exhaust, earthing kit, engine damper, Utec and diversion panel. I originally wanted turbos or supercharger but decided against it. So I decided to go the easier bolt-on route. This space is better than the other brands that I helped install on my friends' Z (of various years). This kit fits right on, the manufacturing tolerances are quite exact I must say. I am happy with the product, the included instructions can be confusing. There parts where you have to flip back an forth between certain diagrams because there are assigned screws according to length and a few other things that a black and white fuzzy photocopy can't make out. My suggestion is youtube motordyne plenum install and watch the video first. After, the instructions will be much more clear. Trust me....video first, paper next!!The install not as easy as they say. It was a total B@$#* to remove the coolant hoses and vac lines on way in back on the throttle body and under intake! That's what took so damn long actually....when they're baked and sticking...have fun. Use a pair of pliers after slipping down the clamps and loosen it up (with the top half of the plenum tipped towards drivers side).Otherwise, the nylon spacers for in interior of the plenum fit right on and do not slide while aligning the top for final torquing to bottom half. It also includes the needed locktite blue in case you're wondering. You may want to take the opportunity to clean out the crud inside and around the throttle body valve while it's out. This will save you $$ from the dealer so get the degreaser/cleaner ready. Just be careful not to press too hard when it comes to the throttle valve, misaligning it will make you go through the relearning process which is a pain. What I did was spray the cleaner on q-tips and lightly work it around until clean. Do not directly spray and go nuts! Patience...Full OCD install...I reserved a few hours or so which worked out because the stuck hoses added 45 min to it!It fits under the brace (which spacers and new bolts are included with this kit as well!)You will probably have to adjust the brace (shorten it by loosening the screw and pulling it in/shorter) since the spacers will raise it and won't align the base holes to the bolts/holes due to the slight angle of it. Two turns should be fine and then lock the lock nut back. There are only 2 bolts you keep from your old strut brace bolts (you'll see, its the only one that is a nut not bolt screws. The cosmetic front cover fits back on, no forcing at all. Reset your ECU and get ready for fun.Yes, it does slightly change the sound of the exhaust. Slightly deeper rumble and louder at 3k+ rpm, more notable around 4k+. If you have an intake, it sounds like a quieter turbo (air suction) only without the blowoff part afterwards. I love it! I know some say they didn't feel it not notice a diff but I did. It's not like it turns into a Bugatti Veryon but I did note a bump in sound and power. Just my opinion...hope it helps!The only reason why I gave it 4 stars is the price but Nismoshop is still slightly cheaper than many others. I am very satisfied with them as a seller so Kudos NismoShop! Thanks a bunch!

See all 3 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy Motordyne 5/16 Copper Isothermal Plenum Spacer 350Z G35

Discount S & S Cycle Power Tune Duals Head Pipes Chrome Chrome 550-0003

S & S Cycle Power Tune Duals Head Pipes Chrome Chrome 550-0003Buy S & S Cycle Power Tune Duals Head Pipes Chrome Chrome 550-0003

S & S Cycle Power Tune Duals Head Pipes Chrome Chrome 550-0003 Product Description:



  • Adds 8 horsepower over stock header pipes
  • Independent dual look with hidden crossover
  • Moves the rear cylinder header under the bike to reduce radiated heat to the passenger
  • Full chrome heat shielding with 220 degree coverage
  • Updated styling to give the bike a modern look

Product Description

Adds 8 horsepower over stock header pipesIndependent dual look with hidden crossoverMoves the rear cylinder header under the bike to reduce radiated heat to the passengerFull chrome heat shielding with 220 degree coverageUpdated styling to give the bike a modern lookOxygen sensor bungsDurable 16-gauge constructionSpherical inlet design for improved sealing and exhaust gasket durabilityHardware included to mount crossover pipeCompatible with all slip-on mufflersMade in USAThis item fits the following models: 1995-2008 Harley Davidson FLHR Road King2007-2008 Harley Davidson FLHRC Road King Classic1998-2006 Harley Davidson FLHRCI Road King Classic1996-1997 Harley Davidson FLHRI Road King2000-2006 Harley Davidson FLHRI Road King2004-2007 Harley Davidson FLHRS Road King Custom2004-2006 Harley Davidson FLHRSI Road King Custom1995-2008 Harley Davidson FLHT Electra Glide Standard1995-2005 Harley Davidson FLHTC Electra Glide Classic2007-2008 Harley Davidson FLHTC Electra Glide Classic1996-2006 Harley Davidson FLHTCI Electra Glide Classic1995-1997 Harley Davidson FLHTCU Electra Glide Ultra Classic2007-2008 Harley Davidson FLHTCU Electra Glide Ultra Classic1995-2006 Harley Davidson FLHTCUI Electra Glide Ultra Classic2003-2006 Harley Davidson FLHTI Electra Glide Standard2006-2008 Harley Davidson FLHX Street Glide2006 Harley Davidson FLHXI Street Glide1995 Harley Davidson FLTCU Tour Glide Ultra Classic1996 Harley Davidson FLTCUI Tour Glide Ultra Classic1998-2002 Harley Davidson FLTR Road Glide2007-2008 Harley Davidson FLTR Road Glide1998-2006 Harley Davidson FLTRI Road Glide

Customer Reviews

Most helpful customer reviews

0 of 0 people found the following review helpful.
5s&s duals
By Richard A. Peters
brought new life to my old evo.like that the front pipe goes under the bike.very noticeable power gain.gained a lot of torque for pulling cargo traler

0 of 0 people found the following review helpful.
5BEAUTIFUL
By Lisa Lucas
quality is awesomethe finish is great very coolfitment was easy, there is a little work involved but well written instructions help

0 of 0 people found the following review helpful.
5Great product!
By Roy
S&S has always had great products but, the Power Tune Duals are super! Fit perfect, look perfect, easy to install and best of all, they sound great! I installed them with stock Harley mufflers on an 07 Electra Glide. I didn't think I wanted it to be loud as it is a touring bike but, I may have to try a set of louder muffler that I have just to hear it! However, the stock mufflers sound very good now. I'm happy with my purchase!

See all 6 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy S & S Cycle Power Tune Duals Head Pipes Chrome Chrome 550-0003

Price Comparisons Youth Motocross ATV Dirt Bike MX Helmet, Gloves and Goggles Pink Flame, X-Large

Youth Motocross ATV Dirt Bike MX Helmet, Gloves and Goggles Pink Flame, X-LargeBuy Youth Motocross ATV Dirt Bike MX Helmet, Gloves and Goggles Pink Flame, X-Large

Youth Motocross ATV Dirt Bike MX Helmet, Gloves and Goggles Pink Flame, X-Large Product Description:



  • Our Newest Ultra High Quality Youth Helmet Set
  • Meets Department of Transportation (DOT) safety standards
  • DOT Rated
  • This is the perfect helmet for those looking for a high quality off-road motocross helmet
  • SIZE CHART BELOW

Product Description

# Our Newest Ultra High Quality Helmet # Meets Department of Transportation (DOT) safety standards which means you are assured safety and compliance with motorcycle helmet laws. # Meets the Federal Motor Vehicle Safety Standard 218 (FMVSS 218) # Our most economical motocross motorcycle helmet is loaded with features including: # 3-Point sun visor for added strength and stylish looks # Liner is easily removable and machine washable. # Fully vented helmet, with multiple vents running along the sides of the helmet. # This is the perfect helmet for those looking for a high quality off-road motocross helmet at an affordable price # Premium chrome mouthpiece #Matching Gloves and Goggles Excellent motorcycle helmet, sport bike helmet, scooter helmet, moped helmet, snowmobile helmet Youth Sizes: Youth Small: 18 ½ to 19 ½ Youth Medium: 19 ½ to 20 ½ Youth Large: 20 ½ to 21 ½ Youth XL: 21 1/2 to 22 1/2

Customer Reviews

Most helpful customer reviews

5 of 5 people found the following review helpful.
4Satisfied
By Hkuhns
We bought this helmet/goggles/gloves set for my 4 year old daughter for Christmas after she got her own quad in the fall. We wanted her to to have a helmet that was DOT approved for her safety and peace of mind. We are satisfied with it but it is huge! It fits well but there is just so much helmet that after she rides for a while she complians it's so heavy that it's making her neck hurt. With time, I'm sure she'll get used to it. She has no choice really, she either wears it or she doesn't ride! My advice, compare the weight of the helmets before you buy.

5 of 6 people found the following review helpful.
5great buy at a great price
By karinasmommy
love this item..my daughter was so happy with her helmet she wouldn't even take it off..it matched her atv perfectly...it looks better than the picture!!and it was a very good deal for everything that comes with it..would definitely recommend this product...

2 of 2 people found the following review helpful.
4Nice Helmet
By Lea Henry
The helmet, gloves, and mask came today after ordering about 4-5 days ago. The Medium Helmet according to their measurements were not as accurate (Medium is too big) but my kid loves it. She would not take it off once I put in on her. She can grow into it along with the gloves and helmet.

See all 6 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy Youth Motocross ATV Dirt Bike MX Helmet, Gloves and Goggles Pink Flame, X-Large

Discounted BikeMaster TruGel Battery MG9-BS

BikeMaster TruGel Battery MG9-BSBuy BikeMaster TruGel Battery MG9-BS

BikeMaster TruGel Battery MG9-BS Product Description:



  • Gel Electrolyte Powersport Batteries
  • Has a much longer storage life on the shelf or in the bike
  • Resists vibration and impacts which damage regular wet batteries
  • Works better at lower and higher temperatures than a wet battery
  • Will not leak like a wet battery, even if the case cracks

Product Description

Gel Electrolyte Powersport BatteriesHas a much longer storage life on the shelf or in the bikeResists vibration and impacts which damage regular wet batteriesWorks better at lower and higher temperatures than a wet batteryWill not leak like a wet battery, even if the case cracksCan be installed at any angleHas a life span that can be up to twice that of a wet batteryMaintains contact with all of the plates, all the time, giving more cranking power and longer lifeWill not sulfate like a wet battery2-year manufacturers warranty12V7B-BYT7B-BSYT7B-4This item fits the following models: 2011-2012 Arctic Cat 150 2x42008-2009 Arctic Cat 366 4x4 Auto2010-2011 Arctic Cat 366 4x4 Auto SE1991-1995 ATK 250 CC1995 ATK 250 LQ1991-1993 ATK 250 MX1991-1993 ATK 3501991-1995 ATK 350 CC1994-1995 ATK 350 DS1991-1993 ATK 350 MX1991-1995 ATK 406 CC1991-1993 ATK 406 MX1991-1992 ATK 6041991-1992 ATK 604 CC1991-1992 ATK 604 MX1993 ATK 6051993-1995 ATK 605 CC1994-1995 ATK 605 DS1993 ATK 605 MX2002-2003 Cannondale Blaze 4402002-2003 Cannondale Cannibal 4402001 Cannondale FX4002003 Cannondale Glamis 4401989-1990 Honda CB400F CB-11990 Honda CBR600F1991-1994 Honda CBR600F F21995-1998 Honda CBR600F F31999-2000 Honda CBR600F F41987-1989 Honda CBR600F Hurricane1993-1999 Honda CBR900RR1987 Honda CH150 Elite1983 Honda GL650 Silver Wing1983 Honda GL650I Silver Wing Interstate1997-2000 Husaberg FE400E1997-2000 Husaberg FE501E1997-2000 Husaberg FE600E1998-1999 Husaberg FS600E1997-1998 Husaberg FX501E1997-2000 Husaberg FX600E1998 KTM 400 LC41997 KTM 400 LSE1996-1997 KTM 620 Duke1996-1997 KTM 620 LC4 EXC1996-1998 KTM 620 RXC1999-2002 KTM 640 Adventure1999 KTM 640 Duke II1999-2001 KTM 640 Supermoto1998-2009 Suzuki DR650SE2011-2012 Suzuki DR650SE1991-1993 Suzuki GSF400 Bandit1996-2003 Suzuki GSF600S Bandit1998-2002 Suzuki GSX600F Katana2003-2004 Triumph Daytona 600

Customer Reviews

Most helpful customer reviews

0 of 0 people found the following review helpful.
4good.
By jeremy
haven't tried the batt yet but seems good to me. have it on a batt charger now till i need it. it looks like a good batt and i'mk sure it will work well for me.

0 of 0 people found the following review helpful.
5Replaced my factory GSX-R Battery with it.
By Jason
Not much to say the casing looks rock solid, I purchased this battery when my factory battery on my 2006 GSX-R 600 bit the dust. Dropped this one in, fired right up. Good to go in my book especially for the price. Only have about a month of experience with it, but it hasn't failed me or showed any signs it would.

See all 2 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy BikeMaster TruGel Battery MG9-BS

Low Price Equinox HD8X Underwater Video Housing for Sony HDR-FX7 Camcorder

Equinox HD8X Underwater Video Housing for Sony HDR-FX7 CamcorderBuy Equinox HD8X Underwater Video Housing for Sony HDR-FX7 Camcorder

Equinox HD8X Underwater Video Housing for Sony HDR-FX7 Camcorder Product Description:



  • Package Includes: HD8 Video Housing, 0.54x Wide angle Lens, External Color Correction Filter, Dome Port Protector , Rubber Legs, Spare Oring Kit
  • Compatible Cameras: Sony HDR-FX7
  • Depth rated to 250 feet / 76 Meters, BRS (Ballast Release System) removable wings for easy transportation
  • 1-inch clear cast-acrylic front/rear face-plates that allows sufficient light to enter housing for white balance to operate and for visible
  • DOES NOT INCLUDE BACK LCD MONITOR

Product Description

The Equinox HD8X Underwater Video Housing for Sony HDR-FX7 Camcorder is constructed from rugged and durable PVC material and one inch cast acrylic front and rear face-plates, Hardware made of Stainless Steel

Customer Reviews

Most helpful customer reviews

0 of 0 people found the following review helpful.
5Great Housing
By Swaggerjack
The housing is big and bulky but does a good job. Delivers great quality footage and keeps your camera safe and dry. Handles on the side increase usability and makes the housing a little negatively buoyant.

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy Equinox HD8X Underwater Video Housing for Sony HDR-FX7 Camcorder

Price Comparisons Shark Evoline Series 2 SharkTooth Helmet (Black, X-Large)

Shark Evoline Series 2 SharkTooth Helmet (Black, X-Large)Buy Shark Evoline Series 2 SharkTooth Helmet (Black, X-Large)

Shark Evoline Series 2 SharkTooth Helmet (Black, X-Large) Product Description:



  • Double homologation full face and open face
  • New integrated anti scratch sunshield "UV protect"
  • Main shield with "Total vision" double treatment
  • Fully removable and washable inside padding's
  • Easy fit glass system

Product Description

EvoLine Series 2 benefits from a development made hand in hand with riders using this helmet from Shark. This keeps a similar identity, even though the Shark research and development department has made double work to answer the specifications requested first by "the everyday riders" on road, highways or city.

Customer Reviews

Most helpful customer reviews

5 of 5 people found the following review helpful.
5Best helmet I've ever owned
By Canyon VTXrider
I've never wanted a modular because I didn't want to (or the design didn't allow it) ride with it up. Most of them in the up position are for when you are stopped and want/need to talk to someone and don't want to yell through your FF.First thing, web bike world says this helmet is heavy at just over 4 lbs BUT it is extremely well balanced. I never really felt the weight, and I wore it for 8-10 hours a day for 7 straight days riding cross country last week! Taking it off I didn't feel like "oh man, glad to have that off my head" feeling.Sight:I have excellent peripheral vision, just had an eye exam before the trip. With the chin bar up or down I could NOT see the sides of the helmet at all. In fact the helmet is so well balanced that with the chin bar in the up position I almost forgot I was wearing a helmet! With the bar down I could see the very front of it but it didn't affect sight if gauges much at all.Noise:I'm deaf in one ear and have high frequency loss in the other (MC Crash in 2001, left turner in front of me). That said I could hear my surroundings just as I normally would. Very little wind noise in either position, but I am behind a batwing.Comfort:After a 3 day break in - which I knew was coming so I wore it around the house before the trip (and yes the wife and kids laughed at me - alot). Very comfortable and no "itch feeling" after hours wering it. It's a little snug getting it on and off but that (to me) means a good hard outter shell, just enough flex in it. Again with the chin bar up (and behind) there's nothing catching the wind and pulling my head backwards.Airflow:Eh... the vents are OK I guess but who needs vents when with one hand you open the chin bar and RIDE with it open???? With the chin bar up and the top vent open (in FL especially) I could feel the airflow over the top of my head and I kept cool even in the heat down in Daytona.Visors:The clear shield has 9 settings, I used 3 or 4 of them. Just cracked to defog and it never closed on its own on me. Almost all the way open to get some wind in the face and it didn't go allt he way back on its own it the wind.The sun visor is AWESOME!!!! Riding due East into the sun, perfect amount of sun protection. The settings are friction based so you can put it where ever you like. It comes all the way down and touches my nose or goes completely out of sight. Unlike most others I tried on (and seem to be geared towards the forward leaning sport bikes)It does take a while to get used to the new location for the thumb tab that helps you open the clear shield, it's top center vs lower left side. But once you get that down the frustration level to open the shield goes away.Chin bar operation:Single hand, shield goes up first (don't forget this) LOTS of warnings about this in the box. Forget and you ruin your shield. Then a thumb press on the red button, it pops open and you just rotate it back. Clicks into place and stays put.Bring it back with a slight tug (shield up first!) then click it in (towards your face) kinda like a seat belt click. Solid and won't move if clicked in correctly, then you can put the shield back down.Overall... best helmet I ever owned.

3 of 3 people found the following review helpful.
3Good, not great.
By Mark E. Mayo
Pappalonis has written a great review. There isn't much more that I can add to the good things about this helmet. But, for me, there were a few things that stood out once I got it on and used it that I could not overlook. I ride a BMW G650GS Sertao, so mileage may vary depending on what you ride. I have a 7 1/4" head size and the XL fit well.- Weight was mentioned before. This is a heavy helmet. It is well balanced, but it is still heavy.- I had too much buffeting while riding. It might be the position of the windscreen, but it is not a movable windscreen. It was too much for me to be comfortable with for more than an hour of riding.- Noise: It is a noisy helmet. As I sat in front of my computer listening to Pandora, I could hear just as well, if not better with the helmet on. I would have expected the music to be quieter or at least muffled with the helmet on, but it was not. It wasn't any better while riding.- No chin curtain. There is nothing up front to keep the cold winter air out. Even the cheap Bell Revolver has a chin curtain.- Sharktooth: The Sharktooth unit is a nice unit. There are cutouts for the speakers, but I didn't find any such cutout for the battery or charging cable. I really wasn't sure what to do with them.- Air Flow: It is non-existent with this helmet. Yes you can flip it up, but that wasn't good enough for me.All and all, a nice helmet with a novel design. There were too many negatives for me that outweighed the positives though. I now have a Shoei Neotec on order.

2 of 2 people found the following review helpful.
4Returned because it was too small -- but great helmet
By Robert Ferguson
I purchased this helmet for it's many positives -- Blue tooth mount prepared -- open or closed face -- one hand open & close -- medium was the only size available -- I went to Shark's website to get sizing info. -- I followed the instructions, however the sizing chart said I was a Medium and when the Medium arrived it was Too Small -- almost ripped my ears off getting it off my head -- great helmet though -- I'll be looking for a Size Large - -

See all 8 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy Shark Evoline Series 2 SharkTooth Helmet (Black, X-Large)